Swing Arm Clicking Machines

The Swing Arm Clicker Series remains the ideal machine for cutting sheets of material with small cutting dies. To assure maximum access and visibility of the material, the swing arm can be easily moved to one side by the operator in order to gather cut pieces and re-position the tool for the next cut. The machine is simply operated by placing sheet material on the bed of the press, properly positioning the cutting tool on the material, and pressing the operating buttons. The beam descends under hydraulic power to cut the required cut shape from single or multiple layers of material. The swing arm clicker machines range from a number of tonnages and bed sizes to suit our customer’s specifications. The Swing Arm Clicker series of die cutting machines range in tonnage from 8 tons to 27 tons and respectively range in bed sizes from (12″-20″)D x (24″-40″)W, they also have a cutting stroke of 3.9″ for an extended range of materials to be processed.



The swing arm clicker is the workhorse for many die cutting materials such as foam, textiles, plastic, rubber, packaging, vinyl, leather, composites, fiberglass, cork, wood, gasket materials (non-asbestos, Teflon, etc.) and more.

  • Automatic stroke-end setting-up to use cutting knives of different heights without any adjustment.
  • Control push buttons with built-in device for 3/10 of a second maximum delay operation to ensure positive safety.
  • Seven different models all have main control organs covered by international patents.
  • All models can be supplied in the CE version, that is equipped with the safety devices requested by the EC-rules 89/336/CEE and 89/392/CEE.
  • Higher speed of operation and greater productivity, which can increase material yield.
  • Reduced wearing of cutting dies and a dramatic increase in savings on cutting pad costs.

  • Machine crating charge – when machine is shipped via a common carrier.
  • Extra white cutting pad – 18” x 36” x 1” thick.
  • convert machine to accept single phase power.
  • Rotary phase converter.
  • 20″ wide aluminum striking plate (19 5/8” x 20” x ¾”).
  • 2mm steel wear plate on the bed and 10mm cutting pad mounted on the head.
  • CSA approved components installed.